Replacing your Parking spaces with LED lighting can be the very best solution towards energy conserving and fostering the progress of your company.
There are a few choices to moving LED together with your parking lot lighting. A lot of people decide to retrofit the bulb. In most of the above and 400 W wattage applications we choose to go with new LED fixtures developed to handle an LED system's dynamics.We have found that parking lot lights are somewhat old, the rubber gaskets are worn and allow moisture into the fixture, they tend to get faded/rusted and in the day's end weren't designed for drivers and its LED board/retrofit. The heat must be managed using a heat sink built into the fixture.Old metal halide and higher pressure sodium fixtures did not need to address thermal management and therefore weren't designed to dissipate heat away from the LED module. Within an environment like a parking lot fixture you can get the life shortened on the machine and outright failure due to heat build up,and with this the increased energy efficiency leads to lower costs.
The coolest thing about going LED is that we're at a point that's very appealing for facility managers and construction owners.Switching from the older high pressure sodium or metal halide fixture to some new smart LED fixture would be the way to go for many. LED prices have come down significantly, lumen outputs are up significantly, DLC accepted LED fixtures have high prices attached in the electricity companies and guarantees on many of these fixtures are 5 to 10 years!
LED Fittings come with the following features and Advantages:
There are a few choices to moving LED together with your parking lot lighting. A lot of people decide to retrofit the bulb. In most of the above and 400 W wattage applications we choose to go with new LED fixtures developed to handle an LED system's dynamics.We have found that parking lot lights are somewhat old, the rubber gaskets are worn and allow moisture into the fixture, they tend to get faded/rusted and in the day's end weren't designed for drivers and its LED board/retrofit. The heat must be managed using a heat sink built into the fixture.Old metal halide and higher pressure sodium fixtures did not need to address thermal management and therefore weren't designed to dissipate heat away from the LED module. Within an environment like a parking lot fixture you can get the life shortened on the machine and outright failure due to heat build up,and with this the increased energy efficiency leads to lower costs.
The coolest thing about going LED is that we're at a point that's very appealing for facility managers and construction owners.Switching from the older high pressure sodium or metal halide fixture to some new smart LED fixture would be the way to go for many. LED prices have come down significantly, lumen outputs are up significantly, DLC accepted LED fixtures have high prices attached in the electricity companies and guarantees on many of these fixtures are 5 to 10 years!
LED Fittings come with the following features and Advantages:
- Developed around the LED module & motorist program.
- High Lumen per volt output - a few are up to 145 lumen/watt - more light
- 3000K, 4000K & 5000K - pleasant light which remains constant for the product's Life Span
- Driver which supports 100-277VAC Car switching
- Comes with lots of configurations
- High quality and dependable Nichia and Maxwell walkers
- DLC Premium Recorded and UL Listed - and all of the performance criteria meet
- IP65 rated
Replacing 250W Metal Halide and Higher Pressure Sodium
For 80 percent of cases, when your fixture is under 20 feet in height, our 60-70 W LED Fixture will be more than enough to replace a 250 W Metal Halide or higher Pressure Sodium fixture. These fittings create over 5,000 lumens. The outcomes are loved by our customers. This represents a 79% electricity savings.
These LED fittings produce approximately 9,000 lumens and recognize a savings of 74%. Some vendors believe 9,000 lumens is sufficient to replace a 400 W Metal Halide. Converting to this fixture is an upgrade over the level which you currently have.Hence,It can be conclude that replacing parking lot lamps with LED's can be the best step towards energy savings.
What about the rebates?
Rebates are offered throughout the Country and change by utility, but there is now a difference between DLC Premium and DLC Standard. There are 2 big differences between the lien figures, the efficiency as well as the criteria.
As soon as a product or a fixture receives the DLC Premium it means it has a greater efficiency standard than DLC Standard. What exactly does that mean for you? It means you fixture will produce more mild and consuming less energy. This is a return on your investment in light and real savings. Since the Entire idea of converting over to LED would be to save money, efficiency matters.
To get the best Energy saving solutions visit Verde Solutions Chicago.
No comments:
Post a Comment